WonderLogics Studio

Model the system. Generate the code.

WonderLogics Studio is the environment for designing control systems at the level above the ladder. Model the hierarchy and states graphically. Define behaviour in plain language. Generate working PLC code for Rockwell or Siemens — automatically, faithfully, ready to commission.

The workflow

From plain language to working PLC code, in one environment.

01

Build the hierarchy and states graphically

Compose your system as objects within objects. Define states, transitions, and interfaces visually. Refactor without rewriting. The model is the source of truth — readable, reviewable, and inspectable at every level.

02

Define behaviour in plain language

State the requirements as you'd describe them on a whiteboard: "open the bypass valve when all filters are clogged". WonderLogics Studio's patented natural-language engine guides you through the relevant options to gradually build the logical sentence, then compiles it into accurate, safety-integrated PLC code.

03

Validate as you go

Run the whole model or specific parts of it in the embedded emulator. Drive inputs, observe state transitions, verify behaviour — all before any hardware is connected.

04

Generate working PLC code

One click produces complete ladder logic for Rockwell Studio 5000 or Siemens TIA Portal. No manual cleanup. No hand-tweaking. The code expresses the model faithfully — and stays in sync as the model evolves.

05

Commission and maintain from your model

Connect WonderLogics Studio to the running PLC and work directly against the model. Watch states transition, inspect values, troubleshoot at the level the system was designed at — not at the level of rungs and tags. The model isn't a document that gets stale. It's the live picture of the running system.

Code generation

Working ladder code, generated from your model — not your interpretation.

Control engineers face two failure points: understanding the process requirements, and translating that understanding into code.

Process requirements are complex, strict, and rarely complete from the start — even for the process engineer. And even with a solid understanding, converting requirements to PLC code is a low-level, manual, and error-prone process. To make things worse, there's no real way to test it until you're on site.

WonderLogics Studio addresses both. You build the model incrementally and can review it with the process engineer — your understanding lives in the model, not scattered across documents and memory. You simulate to verify your understanding in the same incremental way, without waiting for commissioning. And then you generate code: a deterministic, faithful expression of the model. The model stays the source of truth, always.

Rockwell Studio 5000
Siemens TIA Portal
In production

Real systems. Real engineers. Real outcomes.

Commissioning the system was completed successfully within two hours only — without making any change to the automatically generated code.

Ran Nachmani Site Engineering Manager, Unilever Haifa

Solve problems by taking them away entirely.

Alex Marcy President, Corso Systems

To say this platform is slick, beautiful and powerful would be a major understatement. This is going to cut development and documentation time by two-thirds.

Walker Reynolds President, Intellic Integration

We are talking about cutting edge. This is tomorrow's technology. An amazing tool to have in your toolbox.

Paul Lynn No. 1 PLC instructor on Udemy
How to use it

Start through the course. Expand with the results.

Start
Student license

For course participants — full-featured, limited.

Free
  • Full modelling environment
  • Embedded emulator
  • PLC live view
  • 200 IOs for code generation
  • Rockwell PLCs
  • 180-day activation
Take the course →
Expand
For real projects following the learning phase.
  • Additional IOs in packs or unlimited
  • Per-seat or floating licenses
  • Both Rockwell and Siemens targets
  • Extended activation periods
  • Migration from your Student projects
Get a quote
Support
Custom support to scale up the success.
  • Problem-specific design consultancy
  • Custom advanced integrations and features
  • On-demand training
  • Custom components library, built with your team
  • Methodology review on existing projects
Contact us
About WonderLogics Studio

WonderLogics Studio has been in development since 2015 and is in production at companies across food, biotech, water, and energy. It is mature, stable, and actively supported — built around a single bet that the layer between process engineering and PLC programming deserves a tool of its own.

Design above the code.
Generate the rest.

Take the course → See pricing
Get in touch

We'd like to
hear from you.

Questions about the methodology, the course, or the tool? Just want to talk through a control problem? Submit the form or email us directly at info@wonderlogics.com